Vintage watch watchcase typeUnishell (case opening on dial side)
DialWith gold hour markers
Bracelet (vintage)Leather
Movements
MovementsManual winding (mechanical)
Caliber number630
Other<p>Central sweep‑second watch
17 jewels
Created in 1962</p>
Technical Data
Water resistance30 meters
The advantages of this watch
The advantages of this watch
At the heart of this timepiece is the Co-Axial escapement, a revolution in watchmaking when first introduced. The reduced stress on the moving parts means less need for lubrication, longer-lasting accuracy and a more stable power reserve rate. In short, this timepiece performs better for longer.
Superior Precision
Our Co-Axial movements benefit from the revolutionary Co-Axial escapement within their design. With less friction created, they are able to maintain accuracy over a longer period of time, as well as a more stable power reserve rate. Each movement is Chronometer-certified according to international standard ISO3159, requiring a precision of -4/+6 second per day, following the tests at the Official Swiss Chronometer Control (COSC).
Water-Resistance
To ensure the integrity of our timepieces at depth, not just some but all watches are fully immersed in water and pressure is applied up to the point of the guaranteed water resistance. By submerging each watch in water we have chosen – yet again - to exceed normal testing standards.
5-Year Warranty
In our quest to raise industry standards and push the boundaries of quality, all OMEGA watches are offered with a full 5-year warranty. This customer promise shows the confidence we have in the excellence of our timepieces, and provides extra trust and assurance when choosing your watch.
Less servicing
Expect fewer visits to the service centre. The Co-Axial escapement is designed to reduce friction inside the movement. As a result, less lubrication is needed and hence less servicing. Compared to non-Co-Axial watches, the intervals between getting your watch serviced will be much longer.
Shock-resistance
During the homologation process, OMEGA watches are tested to the extreme. This phase includes shock examinations, to confirm reliability and to check that its precision is maintained after a severe impact. All OMEGA timepieces are designed to withstand shocks corresponding to a 1-metre drop on a hard wooden floor. For a standard 150g timepiece, this sudden and rapid acceleration is an equivalent force of up to 5,000 G on the watch head.
1 / 5
Superior Precision
Our Co-Axial movements benefit from the revolutionary Co-Axial escapement within their design. With less friction created, they are able to maintain accuracy over a longer period of time, as well as a more stable power reserve rate. Each movement is Chronometer-certified according to international standard ISO3159, requiring a precision of -4/+6 second per day, following the tests at the Official Swiss Chronometer Control (COSC).
2 / 5
Water-Resistance
To ensure the integrity of our timepieces at depth, not just some but all watches are fully immersed in water and pressure is applied up to the point of the guaranteed water resistance. By submerging each watch in water we have chosen – yet again - to exceed normal testing standards.
3 / 5
5-Year Warranty
In our quest to raise industry standards and push the boundaries of quality, all OMEGA watches are offered with a full 5-year warranty. This customer promise shows the confidence we have in the excellence of our timepieces, and provides extra trust and assurance when choosing your watch.
4 / 5
Less servicing
Expect fewer visits to the service centre. The Co-Axial escapement is designed to reduce friction inside the movement. As a result, less lubrication is needed and hence less servicing. Compared to non-Co-Axial watches, the intervals between getting your watch serviced will be much longer.
5 / 5
Shock-resistance
During the homologation process, OMEGA watches are tested to the extreme. This phase includes shock examinations, to confirm reliability and to check that its precision is maintained after a severe impact. All OMEGA timepieces are designed to withstand shocks corresponding to a 1-metre drop on a hard wooden floor. For a standard 150g timepiece, this sudden and rapid acceleration is an equivalent force of up to 5,000 G on the watch head.
