Limited to 2,020 pieces, this 39.5 mm stainless steel timepiece is a superb tribute to OMEGA’s role as Official Timekeeper of the Olympic Games Tokyo 2020.
The special design includes a polished white ceramic dial with a red-tipped central seconds hand to represent the flag of Japan. There is also a white ceramic bezel with a Liquidmetal™ diving scale and the number 20 filled in red liquid ceramic.
Presented on a white leather strap, the watch features a sapphire crystal caseback with the Tokyo 2020 logo transferred in blue, while through the glass, you can see the OMEGA Master Chronometer Calibre 8800 inside. The presentation box includes an additional stainless steel bracelet and NATO strap.
All OMEGA watches are delivered with a 5-year warranty that covers the repair of any material or manufacturing defects. Please refer to the operating instructions for specific information about the warranty conditions and restrictions.
Features
Anti‑magnetic
Anti-magnetic
Anti-magnetic
The movement is unaffected by exposure to strong magnetic fields, even those greater than 1.5 tesla (15,000 gauss).
Chronometer
Chronometer
Chronometer
Label given to a watch which has undergone precision tests and received a certificate from an official body (COSC).
Date
Date
Date
The day of the month, displayed in a window on a watch dial at the 3 or 6 o’clock position, or within a subdial at 9 o'clock.
Helium escape valve
Helium escape valve
Helium escape valve
Decompression system which allows helium to escape from inside the watch when the watch is worn for professional use in pressure chambers. (Long-term underwater work, crude oil exploration, etc.)
Limited edition (2,020)
Limited edition
Limited edition (2,020)
A series of watches whose production run is determined in advance of production and limited to a set number.
Screw‑in crown
Screw-in crown
Screw-in crown
Self-locking crown, screwed into the tube of the case, used for highly water resistant divers' watches.
Transparent caseback
Transparent caseback
Transparent caseback
A transparent caseback - frequently made of sapphire - makes it possible to see the movement inside the watch.
A bezel which turns in only one direction. Particularly useful for divers who cannot accidentally rotate it in the wrong direction, which could cause them to miscalculate their dive times. A rotating bezel makes it easy to measure elapsed time.
Crystal:Domed scratch‑resistant sapphire crystal with anti‑reflective treatment on both sides
Strap
Strap type:Leather strap
Strap color:White
Strap surface:Rubber / alligator leather
Strap underside:Rubber
Buckle type:Foldover clasp
Buckle material:Stainless steel
The advantages of this watch
The advantages of this watch
Inside this timepiece are the revolutionary components that guarantee the highest standards of performance. From the Co-Axial escapement for long-lasting precision, to the silicon balance spring for superior anti-magnetism, OMEGA has conquered every challenge that matters.
Master Chronometer Certified
Superior Precision
Twice as precise as any officially certified chronometer
Our Master Chronometer watches are tested and certified twice. First, the movement is Chronometer-certified according to international standard ISO3159, requiring a precision of -4/+6 second per day, following the tests at the Official Swiss Chronometer Control (COSC). Then, the watch head and its movement undergo eight Master Chronometer tests set by the Swiss Federal Institute of Metrology (METAS) with criteria of 0/+6 seconds per day.
Everyday items such as mobile phones, metal clasps on handbags, laptops, MRI, induction hobs or automatic doors; subject a watch to magnetic fields and can affect its performance. To prevent the risk of permanent deviations of up to several minutes a day we've conceived movements with antimagnetic materials, such as the silicon balance spring, capable of withstanding the highest fields.
To ensure the integrity of our timepieces at depth, not just some but all watches are fully immersed in water and pressure is applied up to the point of the guaranteed water resistance. By submerging each watch in water we have chosen – yet again - to exceed normal testing standards.
In our quest to raise industry standards and push the boundaries of quality, all OMEGA watches are offered with a full 5-year warranty. This customer promise shows the confidence we have in the excellence of our timepieces, and provides extra trust and assurance when choosing your watch.
Less servicing
Expect fewer visits to the service centre. The Co-Axial escapement is designed to reduce friction inside the movement. As a result, less lubrication is needed and hence less servicing. Compared to non-Co-Axial watches, the intervals between getting your watch serviced will be much longer.
Shock-resistance
During the homologation process, OMEGA watches are tested to the extreme. This phase includes shock examinations, to confirm reliability and to check that its precision is maintained after a severe impact. All OMEGA timepieces are designed to withstand shocks corresponding to a 1-metre drop on a hard wooden floor. For a standard 150g timepiece, this sudden and rapid acceleration is an equivalent force of up to 5,000 G on the watch head.
1 / 6
Master Chronometer Certified
Superior Precision
Twice as precise as any officially certified chronometer
Our Master Chronometer watches are tested and certified twice. First, the movement is Chronometer-certified according to international standard ISO3159, requiring a precision of -4/+6 second per day, following the tests at the Official Swiss Chronometer Control (COSC). Then, the watch head and its movement undergo eight Master Chronometer tests set by the Swiss Federal Institute of Metrology (METAS) with criteria of 0/+6 seconds per day.
Everyday items such as mobile phones, metal clasps on handbags, laptops, MRI, induction hobs or automatic doors; subject a watch to magnetic fields and can affect its performance. To prevent the risk of permanent deviations of up to several minutes a day we've conceived movements with antimagnetic materials, such as the silicon balance spring, capable of withstanding the highest fields.
To ensure the integrity of our timepieces at depth, not just some but all watches are fully immersed in water and pressure is applied up to the point of the guaranteed water resistance. By submerging each watch in water we have chosen – yet again - to exceed normal testing standards.
In our quest to raise industry standards and push the boundaries of quality, all OMEGA watches are offered with a full 5-year warranty. This customer promise shows the confidence we have in the excellence of our timepieces, and provides extra trust and assurance when choosing your watch.
5 / 6
Less servicing
Expect fewer visits to the service centre. The Co-Axial escapement is designed to reduce friction inside the movement. As a result, less lubrication is needed and hence less servicing. Compared to non-Co-Axial watches, the intervals between getting your watch serviced will be much longer.
6 / 6
Shock-resistance
During the homologation process, OMEGA watches are tested to the extreme. This phase includes shock examinations, to confirm reliability and to check that its precision is maintained after a severe impact. All OMEGA timepieces are designed to withstand shocks corresponding to a 1-metre drop on a hard wooden floor. For a standard 150g timepiece, this sudden and rapid acceleration is an equivalent force of up to 5,000 G on the watch head.
Key materials
Stainless Steel
Ceramic
LiquidmetalTM
Sapphire Crystal
1 / 4
Stainless Steel
Stainless steel is certainly the most conventional of watchmaking materials for outer craftsmanship, and offers beauty, strength and affordability. OMEGA uses 316L stainless steel. Known for its corrosion-resistance and high lustre after polishing, this material is often the ideal choice for watches in both daily-use and high-stress situations such as diving and adventure.
2 / 4
Ceramic
OMEGA has unrivalled expertise in the use of ceramics, dating back more than 10 years. Taking its origin from the Greek word "keramos", ceramic is an inorganic, non-metallic substance obtained by firing at high temperatures. It allows the creation of completely dense watch parts with exceptional mechanical properties. Ceramic is one of the most popular choices for customers when selecting their timepiece, thanks to its appealing colour range and specific properties, such as it being two times lighter than stainless steel, hardwearing, highly scratch-resistant, chemically inert, hypoallergenic, environmentally friendly and non-magnetic.
3 / 4
LiquidmetalTM
Since 2010, OMEGA has bonded its ceramics with an alloy called LiquidmetalTM, which offers new decoration possibilities in a metal grey colour with superior scratch-resistance and enduring stability. Composed of titanium, zirconium and copper, this amorphous alloy is three times as hard as stainless steel. When bonded with ceramic parts, LiquidmetalTM can be offered in contrasting finishes (brushed or polished), thanks to the difference in hardness between the two materials.
4 / 4
Sapphire Crystal
To really appreciate the finer details of a timepiece, OMEGA uses synthetic sapphire crystal with a highly scratch-resistant and anti-reflective treatment. Before the machining and finishing processes take place, the sapphire crystals are produced under the Verneuil process, also called flame fusion. It involves the melting of the raw substance using oxyhydrogen flame and the crystallisation of the melted droplets to form a cylinder. Graded 9 on the Mohs-hardness scale (graded 1-10), the resulting sapphire crystals are virtually scratch-proof and very hard, ensuring an unhindered vision at all times.
Stainless steel is certainly the most conventional of watchmaking materials for outer craftsmanship, and offers beauty, strength and affordability. OMEGA uses 316L stainless steel. Known for its corrosion-resistance and high lustre after polishing, this material is often the ideal choice for watches in both daily-use and high-stress situations such as diving and adventure.
Ceramic
OMEGA has unrivalled expertise in the use of ceramics, dating back more than 10 years. Taking its origin from the Greek word "keramos", ceramic is an inorganic, non-metallic substance obtained by firing at high temperatures. It allows the creation of completely dense watch parts with exceptional mechanical properties. Ceramic is one of the most popular choices for customers when selecting their timepiece, thanks to its appealing colour range and specific properties, such as it being two times lighter than stainless steel, hardwearing, highly scratch-resistant, chemically inert, hypoallergenic, environmentally friendly and non-magnetic.
LiquidmetalTM
Since 2010, OMEGA has bonded its ceramics with an alloy called LiquidmetalTM, which offers new decoration possibilities in a metal grey colour with superior scratch-resistance and enduring stability. Composed of titanium, zirconium and copper, this amorphous alloy is three times as hard as stainless steel. When bonded with ceramic parts, LiquidmetalTM can be offered in contrasting finishes (brushed or polished), thanks to the difference in hardness between the two materials.
Sapphire Crystal
To really appreciate the finer details of a timepiece, OMEGA uses synthetic sapphire crystal with a highly scratch-resistant and anti-reflective treatment. Before the machining and finishing processes take place, the sapphire crystals are produced under the Verneuil process, also called flame fusion. It involves the melting of the raw substance using oxyhydrogen flame and the crystallisation of the melted droplets to form a cylinder. Graded 9 on the Mohs-hardness scale (graded 1-10), the resulting sapphire crystals are virtually scratch-proof and very hard, ensuring an unhindered vision at all times.
MovementCALIBREOMEGA 8800
Self-winding movement with Co-Axial escapement. Certified Master Chronometer, approved by METAS, resistant to magnetic fields reaching 15,000 gauss. Free sprung-balance with silicon balance spring, automatic winding in both directions. Rhodium plated finish with Geneva waves in arabesque.
