Seamaster 300 Co-Axial Master Chronometer 41 mm - 234.30.41.21.03.002

Description

This 41 mm Seamaster 300, with its symmetrical case in polished and brushed stainless steel, has a matching bracelet.

The varnished dial, in OMEGA’s own Summer Blue, has a gradient finish to reflect the watch’s level of water resistance. In keeping with the colour code, OMEGA has filled the rhodium-plated hands, recessed hour markers, and open numerals with a unique light blue Super-LumiNova.

Turning the watch over reveals a stamped commemorative Seamaster logo depicting a trident-bearing Poseidon and two seahorses: OMEGA’s 1956 original and the brand’s current design. Behind which sits OMEGA’s Co-Axial Master Chronometer calibre 8912, certified at the industry’s highest level by the Swiss Federal Institute of Metrology (METAS).

5-Year Warranty

All OMEGA watches are delivered with a 5-year warranty that covers the repair of any material or manufacturing defects. Please refer to the operating instructions for specific information about the warranty conditions and restrictions.

Features

Anti‑magnetic
Chronometer
Master Chronometer Certified
Screw‑in crown
Time zone function
Unidirectional rotating bezel

Case Dial and Crystal Bracelet

Case

Between lugs: 21 mm
Lug‑to‑lug: 48.0 mm
Thickness: 13.9 mm
Case diameter: 41 mm
Case: Steel
Water resistance: 30 bar (300 metres / 1000 feet)
Total product weight (approx.): 156 g

Learn more about measurements

Dial and Crystal

Dial colour: Blue
Crystal: Domed, scratch‑resistant sapphire crystal with anti‑reflective treatment inside

Bracelet

Material: Steel
Type of Clasp: Foldover clasp with comfort setting

The advantages
of this watch

Inside this timepiece are the revolutionary components that guarantee the highest standards of performance. From the Co-Axial escapement for long-lasting precision, to the silicon balance spring for superior anti-magnetism, OMEGA has conquered every challenge that matters.

1 / 6

Master Chronometer Certified

Superior Precision

Twice as precise as any officially certified chronometer

Our Master Chronometer watches are tested and certified twice. First, the movement is Chronometer-certified according to international standard ISO3159, requiring a precision of -4/+6 second per day, following the tests at the Official Swiss Chronometer Control (COSC). Then, the watch head and its movement undergo eight Master Chronometer tests set by the Swiss Federal Institute of Metrology (METAS) with criteria of 0/+5 seconds per day.

Discover more about Master Chronometer
2 / 6

Master Chronometer Certified

Anti-Magnetic

Proprietary anti-magnetic materials

Everyday items such as mobile phones, metal clasps on handbags, laptops, MRI, induction hobs or automatic doors; subject a watch to magnetic fields and can affect its performance. To prevent the risk of permanent deviations of up to several minutes a day we've conceived movements with antimagnetic materials, such as the silicon balance spring, capable of withstanding the highest fields.

Discover more about Master Chronometer
3 / 6

Master Chronometer Certified

Water-resistance

To ensure the integrity of our timepieces at depth, not just some but all watches are fully immersed in water and pressure is applied up to the point of the guaranteed water resistance. By submerging each watch in water we have chosen – yet again - to exceed normal testing standards.

Discover more about Master Chronometer
4 / 6

5-Year Warranty

In our quest to raise industry standards and push the boundaries of quality, all OMEGA watches are offered with a full 5-year warranty. This customer promise shows the confidence we have in the excellence of our timepieces, and provides extra trust and assurance when choosing your watch.
5 / 6

Less servicing

Expect fewer visits to the service centre. The Co-Axial escapement is designed to reduce friction inside the movement. As a result, less lubrication is needed and hence less servicing. Compared to non-Co-Axial watches, the intervals between getting your watch serviced will be much longer.
6 / 6

Shock-resistance

During the homologation process, OMEGA watches are tested to the extreme. This phase includes shock examinations, to confirm reliability and to check that its precision is maintained after a severe impact. All OMEGA timepieces are designed to withstand shocks corresponding to a 1-metre drop on a hard wooden floor. For a standard 150g timepiece, this sudden and rapid acceleration is an equivalent force of up to 5,000 G on the watch head.

Key materials

Stainless Steel
Sapphire Crystal

1 / 2

Stainless Steel

Stainless steel is certainly the most conventional of watchmaking materials for outer craftsmanship, and offers beauty, strength and affordability. OMEGA uses 316L stainless steel. Known for its corrosion-resistance and high lustre after polishing, this material is often the ideal choice for watches in both daily-use and high-stress situations such as diving and adventure.
2 / 2

Sapphire Crystal

To really appreciate the finer details of a timepiece, OMEGA uses synthetic sapphire crystal with a highly scratch-resistant and anti-reflective treatment. Before the machining and finishing processes take place, the sapphire crystals are produced under the Verneuil process, also called flame fusion. It involves the melting of the raw substance using oxyhydrogen flame and the crystallisation of the melted droplets to form a cylinder. Graded 9 on the Mohs-hardness scale (graded 1-10), the resulting sapphire crystals are virtually scratch-proof and very hard, ensuring an unhindered vision at all times.

Stainless Steel

Stainless steel is certainly the most conventional of watchmaking materials for outer craftsmanship, and offers beauty, strength and affordability. OMEGA uses 316L stainless steel. Known for its corrosion-resistance and high lustre after polishing, this material is often the ideal choice for watches in both daily-use and high-stress situations such as diving and adventure.

Sapphire Crystal

To really appreciate the finer details of a timepiece, OMEGA uses synthetic sapphire crystal with a highly scratch-resistant and anti-reflective treatment. Before the machining and finishing processes take place, the sapphire crystals are produced under the Verneuil process, also called flame fusion. It involves the melting of the raw substance using oxyhydrogen flame and the crystallisation of the melted droplets to form a cylinder. Graded 9 on the Mohs-hardness scale (graded 1-10), the resulting sapphire crystals are virtually scratch-proof and very hard, ensuring an unhindered vision at all times.

A new look for your watch

Your watch and strap should go together perfectly, but that doesn't mean you can't experiment with different combinations. Why not mix things up and see what happens? You may discover a look that's as individual as you are.

PRECISION AT EVERY LEVEL

Seamaster 300 41 mm - Steel on steel - Blue dial

Movement CALIBRE OMEGA 8912

Self-winding movement with Co-Axial escapement. Certified Master Chronometer, approved by METAS, resistant to magnetic fields reaching 15,000 gauss. Free-sprung balance with silicon balance spring, two barrels mounted in series, automatic winding in both directions. Time zone function. Special luxury finish with Geneva waves in arabesque.