Speedmaster Speedmaster 38 Co‑Axial Chronometer Chronograph 38 mm Orbis Edition

Steel on Steel

324.30.38.50.03.002

Description

This Speedmaster 38 mm is characterised by a number of distinctive elements, making it a fine celebration of the critical eye care provided by Orbis International and its Flying Eye Hospital.

The watch features a stainless steel case and bezel with a tachymeter scale on a blue aluminium ring.

The sun-brushed blue dial includes horizontal, light-blue oval subdials and a vertical oval date window at 6 o’clock. The indexes are rhodium-plated while the hands are also rhodium-plated or blue. The blue central seconds hand includes a special Orbis Teddy Bear counter-weight.

The watch has a stainless steel bracelet, an Orbis Teddy Bear stamped on the caseback, and is driven by the OMEGA Co-Axial Calibre 3330.

5-Year Warranty

All OMEGA watches are delivered with a 5-year warranty that covers the repair of any material or manufacturing defects. Please refer to the operating instructions for specific information about the warranty conditions and restrictions.

Features

Case Dial and Crystal Bracelet

Case

Total product weight (approx.): 132 g
Between lugs: 18 mm
Case: Steel
Case diameter: 38 mm
Water resistance: 10 bar (100 metres / 330 feet)

Dial and Crystal

Dial colour: Blue
Crystal: Scratch‑resistant sapphire crystal with anti‑reflective treatment on both sides

Bracelet

Material: Steel
Type of Clasp: Butterfly clasp

Key materials

Stainless Steel
Aluminium
Sapphire Crystal

1 / 3

Stainless Steel

Stainless steel is certainly the most conventional of watchmaking materials for outer craftsmanship, and offers beauty, strength and affordability. OMEGA uses 316L stainless steel. Known for its corrosion-resistance and high lustre after polishing, this material is often the ideal choice for watches in both daily-use and high-stress situations such as diving and adventure.
2 / 3

Aluminium

Aluminium has the advantage of being a truly lightweight material used for decorative components. Through anodisation, it offers an extensive range of colours for the creation of eye-catching watch parts such as bezel rings, applied elements on the dial, and hands. In particular, OMEGA’s special anodisation process has achieved aluminium bezel rings that are nearly double as hard as regular versions, therefore making them more resistant to outer damage.
3 / 3

Sapphire Crystal

To really appreciate the finer details of a timepiece, OMEGA uses synthetic sapphire crystal with a highly scratch-resistant and anti-reflective treatment. Before the machining and finishing processes take place, the sapphire crystals are produced under the Verneuil process, also called flame fusion. It involves the melting of the raw substance using oxyhydrogen flame and the crystallisation of the melted droplets to form a cylinder. Graded 9 on the Mohs-hardness scale (graded 1-10), the resulting sapphire crystals are virtually scratch-proof and very hard, ensuring an unhindered vision at all times.

Stainless Steel

Stainless steel is certainly the most conventional of watchmaking materials for outer craftsmanship, and offers beauty, strength and affordability. OMEGA uses 316L stainless steel. Known for its corrosion-resistance and high lustre after polishing, this material is often the ideal choice for watches in both daily-use and high-stress situations such as diving and adventure.

Aluminium

Aluminium has the advantage of being a truly lightweight material used for decorative components. Through anodisation, it offers an extensive range of colours for the creation of eye-catching watch parts such as bezel rings, applied elements on the dial, and hands. In particular, OMEGA’s special anodisation process has achieved aluminium bezel rings that are nearly double as hard as regular versions, therefore making them more resistant to outer damage.

Sapphire Crystal

To really appreciate the finer details of a timepiece, OMEGA uses synthetic sapphire crystal with a highly scratch-resistant and anti-reflective treatment. Before the machining and finishing processes take place, the sapphire crystals are produced under the Verneuil process, also called flame fusion. It involves the melting of the raw substance using oxyhydrogen flame and the crystallisation of the melted droplets to form a cylinder. Graded 9 on the Mohs-hardness scale (graded 1-10), the resulting sapphire crystals are virtually scratch-proof and very hard, ensuring an unhindered vision at all times.

A new look for your watch

Your watch and strap should go together perfectly, but that doesn't mean you can't experiment with different combinations. Why not mix things up and see what happens? You may discover a look that's as individual as you are.

Movement CALIBRE OMEGA 3330

Self-winding chronograph with column-wheel mechanism and Co-Axial escapement. Free sprung-balance equipped with Si14 silicon balance spring. Officially certified chronometer.